Diy servicing bicycling

Road wheel set replacement DIY

 cycling bicyclingcycling1 week ago  
Many riders will want to buy a new wheel set to cope with different riding situations, so how to replace the wheel set DIY? Then I asked Lin Zhengnan, a giant bike rider, to do demonstrations for readers.


Lin Zhengnan said that when getting the new wheel set, pay attention to whether there is a quick release and brake block. For the CADEX wheel set used in this demonstration, it has a dedicated quick release, and because it is a carbon fiber wheel set, it must be Use original brake pads. When installing the tire, pay attention to the direction of the tire.

▲ Assemble the new wheel on the tire and quick release.

▲ Demonstration talent: Lin Zhengnan, Giant Rhenium Bicycle Life Museum

▲ Use tools: DIY take-off wheel removal tool, flywheel fixing tool and sleeve, tweezers, hexagon wrench

▲ Release the C-clamp brake and remove the original wheel set.

▲ Install a new wheel set, remember to turn the quick release handle backward.

▲ Adjust the speed to the smallest tooth, and the minimum tension is better for disassembly.

▲ Open the C-clamp brake and remove the rear wheel.

▲ Remove the quick release on the rear wheel.

▲ Remove the flywheel on the rear wheel with the flywheel removal tool.

▲ Remove the entire set of flywheels and prepare to replace them with new ones. (Of course, you can also use the same set of flywheels on both sets of wheels)

▲ When placing the flywheel, pay attention to the large spacing between the teeth on the ratchet.

▲ Align the larger distance in the flywheel before you can put it in.

▲ Place the teeth in order.

▲ Lock the flywheel with a sleeve.

 ▲ Lock the flywheel.

▲ Put in the quick release and put the rear wheel on the car.

▲ Remember to replace the brake pads. (If it is a carbon fiber wheel set, special brake pads are usually attached)

▲ Loosen the fixing screws of the brake pads.

▲ Use tweezers to pull out the brake pads.

▲取出专用的刹车块，要注意左右和方向性。

▲装上刹车皮。

▲锁紧刹车皮的固定螺丝。

▲因为每组轮组的煞车面位置，并不会完全一样，所以要重新调整刹车块的位置。

▲轮框宽度可能不同，影响刹车皮与刹车面的间隙，所以要重新调整刹车握距。

▲即使是使用同样的飞轮，也要重新确认变速的准确性。

图◎王浩韦︱文◎吴敏正

----猜你喜欢----
*轻戳图片即可查看哦*

最新资讯：请点击“原文链接”查看！

Comments

Post a Comment

Popular posts from this blog

How many bicycle are there in the world?

Image
How Many Bikes Are There in the World? Nobody knows exactly how many bikes exist in the world, but it is estimated that there are somewhere around 1 billion. It’s a huge number. For comparison, there are around 1.5 billion cars in the world. At the end of the last century, the numbers were as follows: China is massively holding the first position. China, India, EU, Taiwan, and Japan are responsible for 87% of global production. 364,000 bicycles are produced daily.  That’s 15,000 per hour, or 253 a minute, or 4 bikes a second. 47 670 bikes are being sold daily.  Yes, every two seconds, someone will buy a bike. Source:  Statista Every 19th person in the world buys a bike each year. The production numbers for bicycles are 2.5x higher than for cars. Bikes vs Cars   In 2016,  Copenhagen announced  that for the first time in history there were more bikes than cars on its streets.  It has been one of Copenhagen’s top priorities to make the city bicycle-friend...
Read more

How bicycle balances

Image
There are very few engineering machines, where knowing how it works is difficult than actually working on it. Bicycles are one of those things! It is true that the  exact reasons  validated by both theoretical proof and experimental evidence has not been found for which  all factors  contribute to the balancing of bicycles and by how much. Currently we talk only in terms of major and minor factors for this sort-of magical stability of bicycles. Even then, there are confusion regarding which is the most important factor and how much it accounts for it. In this article, I will be mentioning the major reasons that have been proved experimentally. There are 4 important factors that contributes to balancing of bicycles. The ability of the front wheel to turn into the fall. The trail of steering axis Gyroscopic Precession (Secondary reason - Earlier this was considered to be the primary reason Operator skill that many times acts effortlessly. The ability of front wheel to ...
Read more

साइकल सिटी सपना

Image
उपत्यका साइकल सिटी सपना फाल्गुन १८, २०७५ प्रशान्त माली ललितपुर — ललितपुर महानगरपालिकाका मेयर चिरीबाबु महर्जनले महानगरलाई आफ्नो कार्यकालमा साइकल सिटी बनाएर छाड्ने योजना सुनाएका छन् । यसका लागि नेपाल साइकल सोसाइटी काठमाडौंसँग सम्झौता भएर डिजाइन तयार भइरहेको उनको भनाइ छ । पाटन दरबार परिसरमा यातायात र पैदल यात्रीको चहलपहल । तस्बिर : कान्तिपुर ‘साइकल लेन विकास गर्न यस आर्थिक वर्षमा ५० लाख रुपैयाँ बजेट छुट्याएका थियौं,’ उनले कान्तिपुरसँग भने, ‘बाटोमा पेन्टिङ गरेर साइकल लेन भनेर चिनाइनेछ ।’ पाटन दरबार क्षेत्र केन्द्र बनाएर चारै दिशाबाट चारवटा साइकल लेनको बनाउने महानगरको योजना छ । उपत्यकामा १ हजार ६ सय किमि सडक सञ्जाल छ । तर साइकल रुट अवस्था दयनीय छ । साइकल लेन मात्र नभई पैदलयात्रु सुरक्षित, सजिलै र साइकल पार्किङ सुविधा छैन । नेपालमा बर्सेनि झन्डै १ सय २५ अर्बको इन्धन आयात हुन्छ । साइकल प्रयोगलाई ल्याउन सकेमा इन्धनको खर्च अन्य विकास निर्माणमा प्रयोग गर्न सकिने मेयर महर्जनको भनाइ छ । भन्छन्, ‘साइकल लेनको वैशाख २० भित्रमा अध्ययन प्रतिवेदन तयार भइसक्छ ।’ स...
Read more